Step 1: what you need to make
1. Empty plastic bottles
2.old plastic bottle caps
3.LED’s (any colour you want)
4.resistors (330 ohm)
5.glue gun
6.solderig iron, lead,flux etc….
7.wires
8. wire cutter,thermocol cutter
Step 2: Cut the Bottle
cut the bottle into three pieces like in picture
Step 3: Making the Led Base
connect 5 leds on the base piece
connect all leds in parallel connection
add a 330 ohm resistor seris
connect all with shielded wires
Step 4: Making the Light Reflecting Strips
create some glue strips using hot glue gun on a smooth surface
wait some minutes and peel it out(see picture)
Step 5: Connecting the Strips to Leds
connect the glue strips to led using glue gun
Step 6: Conncect the Middle Piece and Bottom Piece
connect the bottom piece to middle piece and glue together
for waterproof use old bottle cap and m seal.
Fill Water and Give Power
fill bottle with water also cover and seal top part
connect led with 9v batter or usb
THANKS
HAPPY MAKING
Good work, keep doing and be inspired
thanks brother